Overview
This type of product is resistant to high temperatures, solvents, acid and alkali corrosion, has good adhesion, strong retention force, and no residual adhesive. It has excellent adhesion performance on various polar and non-polar material surfaces.
High electrical insulation, no solder penetration in the shielded area, and no residual adhesive on the surface of the gold finger after disassembly.
Moderate unwinding force, suitable for different process requirements.
Capacitor insulation material, PCB board gold finger high-temperature spray shielding protection, etc;
During wave soldering and immersion soldering processes, it serves as a shield for circuit boards, protection for gold fingers, and insulation for some electronic components;
Suitable for motor insulation, circuit board soldering shielding, transformer coil wrapping, motor coil fixation, lithium battery pack wrapping, etc;
Specifications
Item description: | PI High Temperature Resistant Adhesive Tape |
Brand name: | NB |
Prime material: | PI |
High temperature resistant: | >150℃ |
Adhesion type: | Silicone, acrylic |
Thickness: | 0.025-0.15mm |
Peeling force: | 0.5-12N/25mm |
Length: | 2-12N/25mm |
Width: | 10-1600 Mm |
Cutting and slitting: | As per your requirement |
MOQ: | About 600Kgs |
Delivery time: | Within 15 days through peak and off season for you |
Sample: | Free sample is always available for you to test our quality |
Packing: | These protective films are packed in cartons or pallets if LCL |
Payment method: | T/T / L/C /Cash or negotiable |
HS Code: | 3919909090 |
Production Process
FILM BLOWING
In the film blowing process, we use advanced production equipment and imported raw materials to strictly control the protective film quality from the source.
PRINTING
In the printing process, we use environmentally friendly painting by introducing advanced production techniques and equipment, it is now possible to print four patterns and colors in one film.
COATING
We use imported glue and strictly control the quality of finished films, to achieve moderate viscosity and ensure no residue after the removal, also provide you with a good experience of use.
CUTTING
There are seven machines in our cutting workshop, each and every one of them can be adjusted to cut different lengths of protective films to meet your needs.
PACKAGING
We use standard seaworthy packaging to pack the films for you to avoid any possible damage during the transit and storage, packing of customization is also available for you.
Film Blowing
In the film blowing process, we always insist on using brand new and environmental-friendly LLDPE raw materials to ensure the stable quality from the very beginning and we absolutely say “No” to any recycled raw materials.
Film Casting
In the film casting process, our experienced team has every input data precisely set and checked to ensure the good and stable output of our final stretch wrap films. Because we always pay particular attention to every single detail during the whole proce
Film Testing
Our stretch wrap films feature strong toughness and tear resistance, and can not be penetrated easily by the nib under the intense stretch. They also feature strong tensile strength which enables you to wrap three more pallets with the same meters.
Packaging
We use standard seaworthy packaging to pack the stretch wrap films for you to avoid any possible damage during the transit and storage, you can also enjoy customized packaging from our side.
FILM BLOWING
In the film blowing process, we use advanced production equipment and imported raw materials to strictly control the protective film quality from the source.
Container Stuffing
Protective Film for Deep Drawing
Transportation of Protective Film for Deep Drawin
Packing of Protective Film for Deep Drawin
Loading of Protective Film for Deep Drawin
Navigation
+86 158 1691 5404
+86 757 8383 6678
+86 757 8383 8678
No. 10 Industry Huacongsiyue Village, Shishan Town, Nanhai District, Foshan, Guangdong Province, China