Best Way to Remove Plastic Film from Appliances

Removing protective plastic from refrigerator and other appliance surfaces is not difficult, but pulling on the thin coating can cause scratches or marks on the exterior of the appliance. If the delivery team has not removed the protective film from the front and sides of the appliance, it is up to you to pull this off the surface of the refrigerator, oven, dishwasher, or other appliance.

Purpose of Protective Film

The plastic protective film that holds drawers and shelves inside appliances can be annoying and definitely not attractive, but it does serve a purpose. It protects the finish from the time it leaves the factory to the time it is delivered to your home. When an appliance is being transported, the protective film prevents it from rubbing against other objects, cardboard, or being knocked around during transport and installation.

The thick protective film ensures that the sliding drawers and glass shelves are held firmly in place. Movement during transport could break the fragile slides or crack the glass shelves.

CUSTOM PROTECTIVE FILM FOR HOME APPLIANCE

Features of Protective Films for Appliance

Protective films for appliances are used to safeguard the surface of appliances from scratches, abrasions, and other types of damage. Here are some of the common features of protective films for appliances from NB Protective Film:

● Material

Protective films for appliances are made from various materials, including polyethylene, polypropylene, and polyester. They are durable and have a high resistance to wear and tear.

● Thickness

The thickness of protective films can vary depending on the intended use. For appliances, films typically range from 2-4 mils in thickness.

● Adhesive

Protective films have a pressure-sensitive adhesive that allows them to stick to surfaces easily without leaving any residue when removed.

● Transparency

The film is transparent, allowing the appliance's color and texture to show through.

● UV resistance

Many protective films have UV-resistant properties that protect the surface from discoloration or fading due to exposure to sunlight.

● Easy installation

Protective films for appliances are designed to be easily installed without the need for special tools or expertise.

● Customizability

Some manufacturers offer customizable protective films with printed patterns or logos to match the branding of the appliance.

● Durability

Protective films are designed to last for a specific period and can withstand everyday wear and tear. They can also be easily removed and replaced once they have served their purpose.

● Easy to remove

The protective film for appliance is easy to remove without any stains or sticky material left on the surface to keep it still smooth and clean. Learn more

How to Remove Protective Plastic Film? 

Step 1: Use the edge of a plastic putty knife or blade to gently slide under the edge or corner of the plastic film. If the corners of the protective film are tight against the surface of the appliance, look for bubbles or other spaces emerging from the edges of the film.

Step 2: Twist the corners or edges of the plastic film until it gradually loosens its grip on the smooth surface. Working slowly and at an angle, lift the plastic film off the appliance. If it tears, it may be more difficult to remove. However, if you lose your grip or it tears before it is completely off the outer wall, simply start again. Just be careful not to scratch the surface when you push the razor blade or even the plastic edge under the film to remove it.

Step 3: The film around the unit may also be attached by thick protective tape. Remove the tape in the same way as you would with a large sheet of clear plastic. The tape usually leaves some adhesive residue. Do not scrape it off. Hold it down with your fingers and roll it onto itself until you can pull it out of the surface of the appliance.

Step 4: The film is there for protection, but once removed, the front of the appliance and trim need a quick clean to remove any residue or static cling, which attracts dust and dirt. A quick wipe with a clean rag dipped in alcohol will pick up any fine residue on the plastic film. The alcohol will also evaporate quickly and will not leave any streaks.

The method mentioned above is also an answer to the questions "how to remove protective plastic from refrigerator, how to get plastic wrap off new refrigerator, removing plastic protective film, how to remove protective film from dishwasher" and etc.. You can definitely try it out!

Should You Remove Plastic Film From Refrigerator?

The plastic protective film of the fridge surface is usually a protection during packaging and shipping, it can be removed when the refrigerator is installed. Removing the protective plastic film will not only encourage proper heat dissipation but also ensure the nice looking of your fridge.

As a professional protective film manufacturer and supplier, NB Protective Films offers an easily affordable and easy-to-be-removed surface protection solution for various appliance. If you still have concerns about protective film for appliance, click the button below to get free samples or directly contact us to request free quotation and estimate on home appliance protective film.