Mar. 02, 2022
With the continuous development of society and human progress, people's demand for quality of life is constantly improving, and all kinds of new things are constantly emerging. It is this seemingly mundane life that brings us great convenience. In the traditional packaging, our food industry and medical industry are very much in use.
1、Protective film is inert to the surface of the material being protected.
2、When using protective film, the material to be protected will have good adhesion to a certain extent. In the process of material handling and processing, the protective film will not warp or fall off.
3、The protective film will have good weather resistance and stability of holding power to a certain extent. After a few days or a long time, the peeling force does not increase significantly and peels off easily. When it is removed, there is no residue on the surface being protected.
4、Low crystallization point.
Protective Film for Glass
1、Suitable for adhesion: easy to stick and easy to tear.
2、Stable peel force, small change during operation, i.e. the smaller the rise in peel force, the better.
3、Good weather resistance, in the sun exposure conditions, the use period can reach six months to a year.
4、Long storage period, more than one year in storage, no change in quality.
5、No pollution, no corrosion, the adhesive is inert, no chemical reaction with the surface of the material to be stuck.
6、Excellent mechanical properties, tensile strength, modulus of elasticity, elongation, etc. in line with user requirements.
1、PE protective film adhesive (glue) has viscoelastic polymer, film, tear film.
2、The main factors affecting the viscosity: wetting, penetration.
Protective Film for Windows and Doors
Film: the adhesive layer can be in close contact with the surface of the object to be stuck, and as far as possible into the grooves of the surface of the object to be stuck, so that the effective contact area increases.
Wetting: pressure-sensitive adhesive only good wetting of the surface of the bonded material to achieve close contact, to create the conditions for Physico-chemical bonding molecular movement and diffusion: pressure-sensitive adhesive molecules will move to the surface of the bonded material to be bonded material when the two are combined, the bonding distance is less than 5A, physical and chemical bonding will occur.
Protective Film for Aluminium Profiles and Plates
1、PE protective film is easy to stick and easy to tear.
2、Long storage period: more than one year in storage, no change in quality.
3、Peel force stability: little change over time, i.e. the smaller the increase in peel force, the better.
4、Good weather resistance: under sunlight exposure, the use period can reach six months to one year.
5、No pollution, no corrosion: the adhesive is inert and does not react chemically with the surface of the adhered material.
6、Excellent mechanical properties: to meet the user's requirements for tensile strength, modulus of elasticity, elongation, etc.
Our full range of protective films has been used to protect a variety of finished surfaces such as polished or painted metals, textured surfaces, glass, and plastics. Through NB's expertise, it is guaranteed that no adhesive residues will be left on any type of surface. If you are not sure which type of protective film is right for your needs, we will work with you to test options or customize a solution to meet your needs.