How Do I Remove 3M Protective Film?

The first part is just one. Take away the 3M protective film.

Materials needed.

Step 1: Gently try to scrape away the obvious film.

Step 2: Use a heat gun or hot steam gun to apply heat.

Step Three. Use a scraper to scrape around the heated area.

Step Four. Repeat the heating and scraping process.

Step 5. Apply some adhesive remover.

Step Six. Wipe the area dry.

How to remove the refrigerator wrap?

Tilt the refrigerator a bit so it will only stand somewhere on the styrofoam.

Tear the "free" side of the styrofoam so it breaks off and remove it from under the refrigerator.

Tilt the refrigerator to the other side.

Take away the other half of the styrofoam.

PE Shrink Bags

How do I remove the film from my refrigerator?

Twist the plastic film from one corner or side until it gradually loosens its grip on the clever surface. Working gradually in one position, lift the piece of paper in the appliance. If it tears, it may be more difficult to get rid of.

How to remove the protective film from a stainless steel refrigerator?

For people asking how to remove the plastic protective film stuck to stainless steel appliances, the method of removing nail polish with acetone works very well.

The best household method

Add white vinegar to some clean spray bottles.

Spray it under your stainless steel appliances.

Wipe clean with a microfiber cloth.

Once wiped clean, dip the cloth in a little olive oil.

Slowly move the cloth in the direction of the grain.

PVC Protective Films for Plastic Parts and Surfaces

How do I remove shrink wrap from stainless steel?

Dip the corner of a rag into alcohol. Wipe the top of the metal with the alcohol to get rid of the plastic that stubbornly sticks to the metal. Use a strong rubbing motion to get rid of the shrink wrap residue from the metal surface.

How do I remove the protective plastic?

Peel off the plastic as carefully as possible. If necessary, use tweezers or another small device to peel off as much of one corner as possible to start. Gradually peel off the film to prevent tearing it.

How do I remove the film from the polycarbonate fibers?

However, make sure you know if it is plexi or polycarbonate, as polycarbonate will definitely be broken by the oil distillate. With blue plastic film, you can use a hair dryer to soften and remove it. Heat it gently to melt it. Just be careful not to let the plexi get hot.

PE Protective Film for Stainless Steel

How to remove shrink wrap?

After you have mastered the plastic shrink wrap removal technique, the next time you have to do this, the job will be easy.

Place the shrink-wrapped product inside your hand.

Use your fingers to press down from the shrink wrap.

Use your fingers to peel the plastic shrink wrap off the product.

How do I remove the protective film from my microwave oven?

Using tweezers, start at one corner and drag upwards. Gradually work your way around the edge to peel it off.

At NB, we focus first and foremost on meeting the needs of our customers. This means offering a large variety of quality products at great prices. Our protective films have been widely applied to the deep-drawing process, electronic devices, household appliances, aluminum profiles and sheets, windows and doors stainless steel sheets, and plastic sheets. carpets, marbles, glasses, etc. 

We take great pride in being able to provide you with the personalized protective film turnkey solution with our experienced R&D team and advanced facilities. If you want to get more information about the best protective films wholesale price, welcome to contact us.